China Aluminum-Plastic Films H-153-GF-P/H-153-GR-P - Quality Suppliers and Factory Direct Products
- PET layer 6um
- Bonding layer DL3
- Nylon layer 20um
- Bonding layer DL3
- Aluminum layer 40um
- Bonding layer DL3
- CPPlayer 80um
- PET layer 6um
- Bonding layer DL3
- Nylon layer 20um
- Bonding layer DL3
- Aluminum layer 50um
- PP layer 80um
| Item | Unit | Test Method | Typical Values |
|---|---|---|---|
| Thickness | μm | GB/T6672-2001 | 153±5% |
| PET/PA Peel Strength | N/15mm | GB/T 8808-1988 | ≥3 |
| PET/PA Peel Strength | N/15mm | GB/T 8808-1988 | ≥3 |
| PA/AL Peel Strength | N/15mm | GB/T 8808-1988 | ≥3 |
| PA/AL Peel Strength | N/15mm | GB/T 8808-1988 | ≥3 |
| PP/AL Peel Strength | N/15mm | GB/T 8808-1988 | ≥12 |
| PP/AL Peel Strength | N/15mm | GB/T 8808-1988 | ≥12 |
| Sealing Strength | N/15mm | QB/T2358-1998 | ≥60 |
| Sealing Strength | N/15mm | QB/T2358-1998 | ≥60 |
| Formability (Size 34mmx44mm) | mm | Q31/0112000414C016-2018-16 | ≥6 |
| Resistance to Electrolyte | N/15mm | Q31/0112000414C016-2018-16 | ≥8 |
Q1: What is the typical thickness of the H-153 series?
A1: The typical thickness is 153±5% μm, measured according to the GB/T6672-2001 test standard.
Q2: What is the difference in structure between H-153-GF-P and H-153-GR-P?
A2: H-153-GF-P features a structure containing an Aluminum layer of 40um and a CPPlayer of 80um, while H-153-GR-P is configured with an Aluminum layer of 50um and a PP layer of 80um.
Q3: What is the minimum PP/AL peel strength for these materials?
A3: The typical PP/AL peel strength value is ≥12 N/15mm, tested under the GB/T 8808-1988 method.
Q4: What standard is used to measure the sealing strength, and what is the typical value?
A4: The sealing strength is tested using the QB/T2358-1998 method, yielding a typical value of ≥60 N/15mm.
Q5: How is the formability of the H-153 material rated?
A5: For a size of 34mm x 44mm, the formability typical value is ≥6 mm under the Q31/0112000414C016-2018-16 test method.
Q6: What is the resistance to electrolyte for this film series?
A6: It exhibits a resistance to electrolyte of ≥8 N/15mm, tested in accordance with the Q31/0112000414C016-2018-16 standard.